React is a module for functional reactive programming (frp). It provides support to program with time varying values : declarative events and signals. React doesn't define any primitive event or signal, this lets the client choose the concrete timeline.
Release v1.2.1 - %%MAINTAINER%%
The following notations are used to give precise meaning to the combinators. It is important to note that in these semantic descriptions the origin of time t = 0 is always fixed at the time at which the combinator creates the event or the signal and the semantics of the dependents is evaluated relative to this timeline.
We use dt to denote an infinitesimal amount of time.
An event is a value with discrete occurrences over time.
The semantic function 
: 'a event -> time -> 'a option gives
meaning to an event
e by mapping it to a function of time
Some v whenever the event occurs with value
None otherwise. We write [
e]t the evaluation of
this semantic function at time t.
As a shortcut notation we also define <t
: 'a event -> 'a option
(resp. <=t) to denote the last occurrence, if any, of an
event before (resp. before or at)
t. More precisely :
e]t' with t' the greatest t' < t (resp.
<=) such that [
= Noneif there is no such t'.
A signal is a value that varies continuously over time. In contrast to events which occur at specific point in time, a signal has a value at every point in time.
The semantic function 
: 'a signal -> time -> 'a gives
meaning to a signal
s by mapping it to a function of time
s] that returns its value at a given time. We write [
the evaluation of this semantic function at time t.
Most signal combinators have an optional
eq parameter that
defaults to structural equality.
eq specifies the equality
function used to detect changes in the value of the resulting
signal. This function is needed for the efficient update of
signals and to deal correctly with signals that perform
Given an equality function on a type the combinators can be automatically specialized via a functor.
Ultimately signal updates depend on primitives updates. Thus a signal can only approximate a real continuous signal. The accuracy of the approximation depends on the variation rate of the real signal and the primitive's update frequency.
React doesn't define primitive events and signals, they must be created and updated by the client.
Primitive events are created with
React.E.create. This function
returns a new event and an update function that generates an
occurrence for the event at the time it is called. The following
code creates a primitive integer event
x and generates three
occurrences with value
3. Those occurrences are printed
on stdout by the effectful event
Primitive signals are created with
open React;; let x, send_x = E.create () let pr_x = E.map print_int x let () = List.iter send_x [1; 2; 3]
React.S.create. This function returns a new signal and an update function that sets the signal's value at the time it is called. The following code creates an integer signal
xinitially set to
1and updates it three time with values
3. The signal's values are printed on stdout by the effectful signal
pr_x. Note that only updates that change the signal's value are printed, hence the program prints
1223. See the discussion on side effects for more details.
The clock example shows how a realtime time flow can be defined.
open React;; let x, set_x = S.create 1 let pr_x = S.map print_int x let () = List.iter set_x [2; 2; 3]
React.S.create functions return update functions
used to generate primitive event occurences and set the value of
primitive signals. Upon invocation as in the preceding section
these functions immediatly create and invoke an update step.
The update step automatically updates events and signals that
transitively depend on the updated primitive. The dependents of a
signal are updated iff the signal's value changed according to its
The update functions have an optional
step argument. If they are
given a concrete
step value created with
React.Step.create, then it
updates the event or signal but doesn't update its dependencies. It
will only do so whenever
step is executed with
React.Step.execute. This allows to make primitive event occurences and
signal changes simultaneous. See next section for an example.
Update steps are made under a synchrony hypothesis : the update step takes no time, it is instantenous. Two event occurrences are simultaneous if they occur in the same update step.
In the code below
y will always have simultaneous
occurrences. They may have simulatenous occurences with
send_z are used with the same update step.
let w, send_w = E.create () let x = E.map succ w let y = E.map succ x let z, send_z = E.create () let () = let () = send_w 3 (* w x y occur simultaneously, z doesn't occur *) in let step = Step.create () in send_w ~step 3; send_z ~step 4; Step.execute step (* w x z y occur simultaneously *)
Primitives are the only mean to drive the reactive
system and they are entirely under the control of the client. When
the client invokes a primitive's update function without the
step argument or when it invokes
React.Step.execute on a
value, React performs an update step.
To ensure correctness in the presence of threads, update steps
must be executed in a critical section. Let uset(
p) be the set
of events and signals that need to be updated whenever the
p is updated. Updating two primitives
concurrently is only allowed if uset(
p) and uset(
disjoint. Otherwise the updates must be properly serialized.
Below, concurrent, updates to
y must be serialized (or
performed on the same step if it makes sense semantically), but z
can be updated concurently to both
open React;; let x, set_x = S.create 0 let y, send_y = E.create () let z, set_z = S.create 0 let max_xy = S.l2 (fun x y -> if x > y then x else y) x (S.hold 0 y) let succ_z = S.map succ z
Effectful events and signals perform their side effect exactly once in each update step in which there is an update of at least one of the event or signal it depends on.
Remember that a signal updates in a step iff its equality function determined that the signal value changed. Signal initialization is unconditionally considered as an update.
It is important to keep references on effectful events and
signals. Otherwise they may be reclaimed by the garbage collector.
The following program prints only a
let x, set_x = S.create 1 let () = ignore (S.map print_int x) let () = Gc.full_major (); List.iter set_x [2; 2; 3]
Lifting transforms a regular function to make it act on signals.
React.S.app allow to lift functions of arbitrary arity n,
but this involves the inefficient creation of n-1 intermediary
closure signals. The fixed arity lifting
functions are more efficient. For example :
Besides, some of
let f x y = x mod y let fl x y = S.app (S.app ~eq:(==) (S.const f) x) y (* inefficient *) let fl' x y = S.l2 f x y (* efficient *)
Pervasives's functions and operators are already lifted and availables in submodules of
React.S. They can be be opened in specific scopes. For example if you are dealing with float signals you can open
If you are using OCaml 3.12 or later you can also use the
open React open React.S.Float let f t = sqrt t *. sin t (* f is defined on float signals *) ... open Pervasives (* back to pervasives floats *)
let open React.S.Float in let f t = sqrt t *. sin t in (* f is defined on float signals *) ...
Mutual and self reference among time varying values occurs naturally in programs. However a mutually recursive definition of two signals in which both need the value of the other at time t to define their value at time t has no least fixed point. To break this tight loop one signal must depend on the value the other had at time t-dt where dt is an infinitesimal delay.
The fixed point combinators
React.S.fix allow to refer to
the value an event or signal had an infinitesimal amount of time
before. These fixed point combinators act on a function
f that takes
as argument the infinitesimally delayed event or signal that
In the example below
history s returns a signal whose value
is the history of
s as a list.
When a program has infinitesimally delayed values a primitive may trigger more than one update step. For example if a signal
let history ?(eq = ( = )) s = let push v = function |  -> [ v ] | v' :: _ as l when eq v v' -> l | l -> v :: l in let define h = let h' = S.l2 push s h in h', h' in S.fix  define
sis infinitesimally delayed, then its update in a step
cwill trigger a new step
c'at the end of the step in which the delayed signal of
swill have the value
c. This means that the recursion occuring between a signal (or event) and its infinitesimally delayed counterpart must be well-founded otherwise this may trigger an infinite number of update steps, like in the following examples.
For technical reasons, delayed events and signals (those given to fixing functions) are not allowed to directly depend on each other. Fixed point combinators will raise
let start, send_start = E.create () let diverge = let define e = let e' = E.select [e; start] in e', e' in E.fix define let () = send_start () (* diverges *) let diverge = (* diverges *) let define s = let s' = S.Int.succ s in s', s' in S.fix 0 define
Invalid_argumentif such dependencies are created. This limitation can be circumvented by mapping these values with the identity.
Strong stops should only be used on platforms where weak arrays have
section and the
strong argument of
if that's not the case.
React.S.stop is called with
~strong:true on a
v, it is first stopped and then it walks over the
prods of events and signals that it depends on and
unregisters itself from these ones as a dependent (something that is
normally automatically done when
v is garbage collected since
dependents are stored in a weak array). Then for each element of
prod that has no dependents anymore and is not a primitive it
stops them aswell and recursively.
A stop call with
~strong:true is more involved. But it allows to
prevent memory leaks when used judiciously on the leaves of the
reactive system that are no longer used.
Warning. It should be noted that if direct references are kept
on an intermediate event or signal of the reactive system it may
suddenly stop updating if all its dependents were strongly stopped. In
the example below,
e1 will never occur:
This can be side stepped by making an artificial dependency to keep the reference:
let e, e_send = E.create () let e1 = E.map (fun x -> x + 1) e (* never occurs *) let () = let e2 = E.map (fun x -> x + 1) e1 in E.stop ~strong:true e2
let e, e_send = E.create () let e1 = E.map (fun x -> x + 1) e (* may still occur *) let e1_ref = E.map (fun x -> x) e1 let () = let e2 = E.map (fun x -> x + 1) e1 in E.stop ~strong:true e2
The following program defines a primitive event
the UNIX time and occuring on every second. An effectful event
converts these occurences to local time and prints them on stdout
along with an
escape sequence to control the cursor position.
let pr_time t = let tm = Unix.localtime t in Printf.printf "\x1B[8D%02d:%02d:%02d%!" tm.Unix.tm_hour tm.Unix.tm_min tm.Unix.tm_sec open React;; let seconds, run = let e, send = E.create () in let run () = while true do send (Unix.gettimeofday ()); Unix.sleep 1 done in e, run let printer = E.map pr_time seconds let () = run ()